MHK-1050T Series Paper Box Fully Automatic Die Cutting and Creasing Machines

MHK-1050T Series Paper Box Fully Automatic Die Cutting and Creasing Machines

MHK-1050T Paper Box Fully Automatic Die Cutting and Creasing Equipment with Four Side Stripping

The MHK sequence entire-automatic/hot foil stamping/stripping/creasing die cutting machines can proficiently complete the die chopping and embossing of merchandise,as well as keeping the optimum precision and solution good quality.The MHK series entire-computerized/scorching foil stamping/stripping/creasing die-slicing equipment are well geared up and nearly can adapt to all die slicing requirements of goods.

Primary features:

1. High top quality feeder made in ZheJiang with 4 suction nozzle for stack paper and 4 suction nozzle for providing paper , assures stable and rapidly paper feeding .

2. Pre-loading unit , non-cease feeding , with Max pile top to 1600mm.

three. The pre-loading unit is geared up with guiding rails , operator shift the stack paper to feeder correctly and conveniently .

4. Side and entrance guiding have sensor which can modify the sensitivity.

five. The anti-obstacle gadget avert the equipment ruined.

6. Paper feeding will be gradual down when the paper get to the entrance guiding , obtain a lot more exact location .

seven. Japanese NITA express belt , the velocity can be adjusted .

8. Germany made stainless metal is employed for convey board in order to achieve easy and swift paper supply .

9. Pneumatic cutting plate lift for straightforward slide in and out .

10.Simple way to switch in excess of and adjust die chopping chase and plate with short time .

11.Higher quality gripper bars manufactured in Japan with extended daily life time .

12.Large high quality U.K imported chain guarantee stability and precision in extended time operating .

thirteen.Computerized lubrication and cooling system for major travel and computerized lubrication for main chain .

14.Overload security system with torque limiter in index box for the optimum protection of operator and gear .

15.Crank shafts and worm rod is manufactured of forty Cr with heating dealing with . Turbine is produced of copper .

16.Substantial top quality imported air clutch .

17.SMC pneumatic factors .

18.The upper , center and lower stripping frames are managed by three GPRS of cam wheels respectively.

19.Match with the centerline registration system in die cutting unit , the exact same method also apply to the stripping station to lessen changeover time , Exact positioning can boost generation performance.

Main Specifications:

Product MHK-1050T/TC MHK-1050  MHK-1050CE 
Max.Sheet measurement 1050*750 mm 1050*750 mm 1050*750 mm
Min. Sheet measurement 400*360 mm four hundred*360 mm  four hundred* 360 mm
Max.Die reduce measurement 1040*720 mm 1040* 720mm 1040*720 mm
Max Hot stamping measurement 1040*720mm  No No
Inner chase measurement 1080*745mm 1080*745 mm 1080*745 mm
Paper thickness

80-600g/m2 

corrugated considerably less than 4mm

eighty-600g/m2 

corrugated significantly less than 4mm

eighty-600g/m2 

corrugated less than 4mm

Precision less than .1mm considerably less than .1mm less than .1mm
Max. strain 300T 300T 300T
Max die lower speed 7500s/h 7500 s/h 7500 s/h
Max feeder pile top 1600mm(contain pallet) 1600mm(consist of pallet) 1600mm(include pallet)
Max shipping pile height 1400mm(include pallet) 1400mm(contain pallet) 1400mm(contain pallet)
Max.foil diameter 250mm(vertical) 200mm(horizontal) No No
Foil width 20-1571 mm No  No
Main motor 11Kw 11Kw 11Kw
Overall size 7700*5200*2600mm 6300*4600*2400mm 7700*4600*2400mm
Device fat 18.5 Ton sixteen Ton seventeen Ton
Complete energy 52 Kw

MHK-1050T Series Paper Box Fully Automatic Die Cutting and Creasing Machines

Tags: