Komatsu PC210-7 Amphibious Excavator with Undercarriage Pontoon

Komatsu PC210-7 Amphibious Excavator with Undercarriage Pontoon

We UNION largely produce 6Ton to 50Ton amphibious excavator. In accordance to your requests, we could assemble diverse manufacturers and design excavator higher parts, like PC200, HITACHI ZX210, DH215, EX120,CAT315…. Also, if you have crawler excavator (New or Used) , we can only make amphibious undercarriage (Pontoon Undercarriage) for you. CZPTly would like could have possibilities to do businss with you and welcome you to pay a visit to our manufacturing facility!


1.Deepening of canal, river channel and river mouth
2.Swamp land clearing at mining location, plantation and forest
three.Developing bund for flood prevention and land reclamation
4.Creating bund wall for fish and shimp ponds and salt creating market
5.Sludge clearing of lakes, ponds and water reservoir
six.Digging trenches for oil and fuel piping installation
seven.Transporting and clearing landslide and flood hit spot
eight.Swamps and wetlands building
nine.Street development by way of wetlands.


Engine Engine model DOOSAN DE08TIS
Gas Diesel
Number of Cylinders 6
Number of strokes 4
Piston Displacement eight.07 Ltr
Power 110Kw (150PS) / 1950rpm
Turbo charged Of course
Water-cooled Indeed
Fuel tank 350L
CZPT System    Flow rate of pump  2 X 211 L / min
Circuit of working devices 33000KP
Circuit of walking 33000KP
Circuit of turning 28000KP
Swing speed twelve.4 rpm
Control valve  TONG MYUNG
Swing motor model TONG MYUNG
Travel motor model DOOSAN
Operate Data Operating Weight  33000KG
Maximum Tractive effort 205KN
Arm / Boom  KOMAUS PC200-seven original arm
Bucket capacity .9M3


Dimensions ( UCM210FT ) mm
A Track length 9000
B Ground contact length of tracks 5200
C Tail swing radius 2750
D Overall length 11200
E Overall height (to the top of arm) 3880
F Ground clearance of counter weight 2571
H Overall width 4940
I Track gauge 3440
J Track width 1500
K Ground clearance 1140
L Track height 1840
M Overall height (to the top of cab) 3870
N Width of the top part 2710 

Details of manufacture

Packing and delivery


Q: How to set up ?

A: 1., a floating box landing, the two via the tube into the floating box hole, inserted in the aspect of the tube, a piece of wooden pad, so that the lateral tilt
two. fall another pontoon and level it by means of two tubes
three. soon after the tube is inserted, the tube is set by the bolt
four.. Enlarge the plate to the tank and use the U card to fix it
five., the higher element of the excavator hoist, set on the market, with broad eyes on the Qi, tighten the screws
six. connect the hydraulic oil pipe, link the oil pipe of the motor on the float box to the excavator

Q:How to work?

A : 1., prohibit the procedure of a lot more than one.six meters h2o depth, silt is not constrained to depth
two., prohibited in the uneven, the left and proper sides of the floating box, the concentrate of wonderful disparity in the scenario, walking functions
3. amphibious excavators use sluggish gear whilst going for walks, and do not use quickly gear
four., begin the going for walks condition, the very first action on the foot of the throttle, and then wander
5. do not press tough objects even though walking
six. stay away from prolonged walking on the tough surface
seven. when turning, the entrance of the floating body can be lifted by the power of the bucket, and when the angle is shifted, the operating of the chain plate can be prevented, and the derailment of the chain plate can be prevented

Q: How to sustain?

A:1. make certain the chain pressure, unfastened situation must be altered to 3-five, a chain wheel suspension track shall prevail
2. make certain that the seat four screws, and make sure ten days (or function eighty several hours) to defeat the butter
three. leading silk, defeat butter when a 7 days
Check out the screws amongst the 4. chains and the chain, verify the screws usually and preserve the screws tight

Komatsu PC210-7 Amphibious Excavator with Undercarriage Pontoon